"If you have an apple and I have an apple and we exchange these apples then you and I will still each have one apple. But if you have an idea and I have an idea and we exchange these ideas, then each of us will have two ideas." ...GBS

02 November 2008

Padavugal launched on October 2008

Posted by Jaisal Abdurrahman

An E- Magazine published by Indian islahi centre Speakers,Readers & Writers forum lounched on December Last week.from the Propitious feed back , forum planned to publish next edition in very soon.


06 July 2008

Fix - Cannot open exe files after virus infection

Posted by Jaisal Abdurrahman

You cannot open exe files when your computer infected with w32/sircam or any similar type of virus.when try to open any exe files or any programs , you may get thefollwing type of messages

The system cannot find the file
or Windows cannot file this file select program from a list

the reason is ,virus can change the default configuration for running EXE files. This may lead to failed operation when you try to run EXE files. the following solution will help you to fix the problem after removal of viruses

1- Go to start and click run
2- type command.com and press OK.this will open command prompt.
3- type cd\ and press enter to get root of C drive
4- type cd \windows press enter
5- Type copy regedit.exe regedit.com and then press Enter
6- Navigate to and select the key:
7- In the right pane, double-click the (Default) value.
8- Delete the current value data, and then type:
"%1" %*
Tip: Type the characters: quote-percent-one-quote-space-percent-asterisk.
9- Close Regedit utility and restart your computer.

Now the problem should be solved

14 June 2008

A handy tool to forward ports in windows PC

Posted by Jaisal Abdurrahman

Analog Port mapper is a free handy tool for port forwarding in windows PC's.As far as i know it is quiet easy to forward ports in linux machine, but in windows xp so difficult to forward a port unless we have enabled ICS .it is usual to think why needed a portforwarding in a particular windows xp machine.I had a situation to make me think about this feature.In one of my network scenario ,remote locations are connected via vpn clinet software .so i can access only the PC which is installed client software in the remote network.ones i needed to acces an IP camera which is connected in remote network,make me think about any ways to reach the IP camera.Bridging VPN adapter with remote network is not a proper solution because of difficulty in DHCP assignment of VPN adapter.
However this handy tool helped me to reach to the IP camera which is in remote network subnet.the tool forwading traffics comming from port 80 of VPN adapter,to the ip address of camera and make it possible to monitor the camera from head office.

Download Port mapper

10 June 2008

Not Afraid To Stand Alone

Posted by Jaisal Abdurrahman

A nice song from Native deen

22 April 2008

The Grid: The Next-Gen Internet?

Posted by Jaisal Abdurrahman

AMSTERDAM, Netherlands -- The Matrix may be the future of virtual reality, but researchers say the Grid is the future of collaborative problem-solving.

More than 400 scientists gathered at the Global Grid Forum this week to discuss what may be the Internet's next evolutionary step.

Though distributed computing evokes associations with populist initiatives like SETI@home, where individuals donate their spare computing power to worthy projects, the Grid will link PCs to each other and the scientific community like never before.

The Grid will not only enable sharing of documents and MP3 files, but also connect PCs with sensors, telescopes and tidal-wave simulators.

IBM's Brian Carpenter suggested "computing will become a utility just like any other utility."

Carpenter said, "The Grid will open up ... storage and transaction power in the same way that the Web opened up content." And just as the Internet connects various public and private networks, Cisco Systems' Bob Aiken said, "you're going to have multiple grids, multiple sets of middleware that people are going to choose from to satisfy their applications."

Read More

14 April 2008

Ana Al'ibadi

Posted by Jaisal Abdurrahman

Anasheed from shiekh Meshary Rashid AL 'Afasi

13 March 2008

Download internet explorer 8 Beta

Posted by Jaisal Abdurrahman
18 February 2008

Downgrade Vista to XP on SATA AHCI ebedded Laptops

Posted by Jaisal Abdurrahman

Here I am going to explain how to Downgrade Vista to XP on New Laptops with 960/965/gm965 chipsets and the ALC268 realtek high definition sound card.
The Following method tested in Toshiba A200 PSAE3C and HP dv6500.but it may work with other Toshiba A200 Series and HP dv6000 series also depending on chipset.
First,backup your existing OS and files by creating recovery disks,read your manual for further details.
Download the following files which are needed for Disk Creation process

Intel SATA Driver
Microsoft High definition hotfix

Slipstream your Windows xp using nLite as follows

1. Copy The Windows XP SP2 cd which you have to a folder named xpsp2
2. download and install Intel SATA Driver
3. Download Microsoft High definition hotfix and extract it using winrar
4. Download and install nLite

Run nlite

Image Hosting by Picoodle.com
Chose your Winxp folder and click Next
Click Next again until the below screen appear

Image Hosting by Picoodle.com
Choose Drivers and Bootable cd then Click Next

Image Hosting by Picoodle.com
Import Single Driver

Image Hosting by Picoodle.com
Browse C:\Program Files\intel\Intel Matrix Storage Manager\Driver\iastor.inf and click Open

Image Hosting by Picoodle.com
Select Intel(R) 82801HEM/HBM SATA AHCI Controller (Mobile ICH8M-E/M) then Click OK

Image Hosting by Picoodle.com

Click Insert again and choose Multiple driver folder

Image Hosting by Picoodle.com
Browse the Commonfiles Folder which you extracted from High definition hotfix then Click OK

Image Hosting by Picoodle.com
Select Commonfiles and Click OK
Click Next

Image Hosting by Picoodle.com
Apply Changes by Clicking YES

Image Hosting by Picoodle.com
After Processing Click Next

Image Hosting by Picoodle.com
If you want to Burn it directly to a cd ,select mode Direct Burn and specify a label.
after inserting a blank cd,Click Burn

Now you can use this cd to install Windows XP in your machine

12 January 2008

Build a Wireless Repeater Bridge

Posted by Jaisal Abdurrahman

To build a network bridge is easy through a Ethernet cable.It is used to connect two LAN segment. Making it trough a wireless link is not easier like Ethernet. The two segments will be in the same subnet and look like two Ethernet switches connected by a cable to all computers on the subnet.wireless bridge will be great idea when we don't want to run an Ethernet cable between two locations.
The following guide is explains building of a wireless repeater bridge using DD-WRT firmware from my experience
the example scenario as follows :-
Image Hosting by Picoodle.com

Materials used :-

Linksys WRT54G as primary router
Image Hosting by Picoodle.com
Linksys WAP54G v3 as secondary access point
Image Hosting by Picoodle.com
DD-WRT v24 Beta (08/15/07) micro Firmware to flash WAP54g

Image Hosting by Picoodle.com

Flash your WAP54G with DD-WRT v24 Beta (08/15/07) micro firmware

  1. On Secondary(DD-WRT) Router make Restore Factory Defaults
  2. Connect your PC to the secondary router via wired or wireless
  3. Open the Wireless -> Basic Settings tab
    • Wireless Mode : Repeater Bridge
    • Wireless Network Mode : Mixed
    • Wireless Network Name(SSID) : Same as Primary Router
    • Wireless Channel : Auto
    • Wireless SSID Broadcast : Enable
    • Network Configuration : Bridged
    • Save Settings
  4. Virtual Interfaces Section
    • Add
    • Wireless Network Name(SSID) : anything Different from Primary Router
    • Wireless SSID Broadcast : Enable
    • AP Isolation : Disable
    • Network Configuration : Bridged
    • Save Settings
  5. Open the Setup -> Basic Setup tab
    • Connection Type : Disabled
    • IP Address : (Assuming Primary Router IP is
    • Mask :
    • Gateway: (IP of your Primary Router)
    • Assign WAN Port to Switch : Checked or Unchecked - your choice
    • Save Settings
  6. Open the Security -> Firewall tab
    • Disable SP1 firewall
    • Save Settings
  7. Open the Status -> Wireless tab
    • Site Survey
    • Join Primary Router
    • Continue
  8. APPLY Settings
Now you can be able to connect internet through the newly configured Secondary router. Clients will receive IP Addresses from the Primary Router.(if DHCP Server Enabled)